QCY HT01 Manual English QCY HT01 Earbuds Manual Instructions QCY HT01 Reset QCY HT01 Pairing Touch Control Charging User Manual Guide Warranty

New Advanced QCY HT01 Earbuds popular worldwide, more and more customer got their QCY HT01 , as QCY HT01 package come with user manual instructions, there are many customer connect QCY for the problems as QCY HT01 Manual English, QCY HT01 Earbuds Manual, QCY HT01 Instructions, QCY HT01 Reset, QCY HT01 Pairing, QCY HT01 user manual etc.

QCY made a decision to post QCY HT01 Manual online, then our customer can checking anytime anywhere!

QCY TWS Bluetooth Earbuds
Dual-mic Active noise Cancellation TWS earbuds

Overview
Choose Your Eartips Please try medium eartips first as they fit most people
Earbud / USB Charging port / Charging case

QCY HT01 Reset

How to reset QCY HT01

Factory Setting (please try the following steps if earbuds fail to connect)

  1. On cellphone, delete the connectivity records of QCY-HTO1
  2. Power off two HT01 earbuds before reset QCY HT01 . hold MFBs for 10s or until leds blink red and white 3 times to set earbuds to factory
  3. After factory setting, please refer How to Pair to build connection with cell phone.
  4. If steps all success, QCY HT01 Reset complete!

QCY HT01 Pairing

How to Pair QCY HT01

First Time Pairing

  1. Pick up both QCY HT01 earbuds, pop both earbuds into the case to
    activate them
  2. Pick up both earbuds out of the charging case again
  3. On cellphone, search for QCY-HT01 and tap to connect
  4. If connect success, QCY HT01 Pairing complete!
  5. Once paired earbuds will auto power on upon picking up
    from the case. If earbuds fail to auto power on, please
    charge them and try again


Switch Paired Device

Turn off phoneA’s Bluetooth faculty and earbuds will auto
disconnect and enter into pairing mode

On phoneB, search for QCY-HTO1 and tap to connect.
Multi-point connection is not available. Earbuds will
auto reconnect to phoneB uphon powering up again

QCY HT01 Mono mode

  1. Power off earbuds, keep touching MFB on either earbud
    for Ss to enter pairing mode(LED blinks red and green
  2. On cellphone, search for QCY-HTO1 and tap to connect
  3. Connected

QCY HT01 How to Wear

QCY HT01 How to use

  1. Rotate earbud and pop it into your ear then shake head
    to check wearing stability
  2. Please adjust mic towards your mouth to gain better
    calling experience

Three-way Calling Swith
Press MFB to answer incoming call. If another call is coming
in sync, press MFB to put the first call on hold while
activating the second call or hold MFB to ignore
the second call. Double press mfb to switch between
held call and active call

QCY HT01 Controls

  • Power-on
  • power off: Hold MFB fdrl 5s LED glows white for 1.5s
  • Charging : Pick up earbuds from case LED glows white for 1.5s
  • Power-off
    Power-on: put the headphone into the box close the cover and turn off the headset : Led glow red
    Pull back into case : Led glow red
  • TWS Pairing:
    First pairing followingfactory setting
    1. Left earbud wil auto turn connectable to phone
    LED blinks red and white
    • Earbuds will auto cower off if they fail to pair with each other in 5 minutes : LED blinks red and white
  • Answer/end call: Incoming call/calling: Double press MFB
  • Ignore call: Incoming call: Hold MFB for 1s
  • Voice assistant: Connected: Three press left MFB
  • FCC Statement :The headphones are outside the box: Long press MFB flash alternately three times
  • Music pause resume playing: Double press MFB
  • Skip track : Playing : Long press fight MFB
  • Switch call to earbud: Call handled by phone : Put on the headphone
  • Switch call to phone: Call handled by earbuds Take off the headphone

QCY HT01 Charging earbud

  • Push earbuds into case and earbuds will auto be charged
  • LEDs will glow solid red when charging and turn green
  • or l minute once topped up

QCY HT01 Charging the Case

  • Please charge the case via USB cable
  • Battery level%: LED blinks red
  • Battery level between 60% and 95%: LED blinks green
  • Battery level>95%: LED blinks white
  • Top up: LED turns on solid white

QCY HT01 Tips

  1. Before using the headset, please read the manual
    carefully and keep it for future references
  2. The headset need to be fully charged prior to first-time use
  3. If the headset is left unused for over two weeks, please
    recharge it periodically
  4. Please use the chargers made by qualified manufacturer
  5. If the headset cannot be found by your phone, please check
    whether it is in pairing mode; if left unconnected for a long
    while, the headset will exit pairing mode, please re-enter
    the mode; if a procedure error of your phone occurs, reboot
    it; if a procedure error of the headsetoccurs, reboot or reset it.

QCY HT01 Caveats

  1. Never disassemble or modify your headset for any
    reasons to avoid any damages and danger.
  2. Do not store the headset in extreme temperatures (under
    0° C or over45°C
  3. Avoid using the indicator close to the eyes of children or
    animals
  4. Do not use this headset during a thunderstorm to avoid
    irregular function and increased risk of electricshock
  5. Do not use harsh chemicals or strong detergents to
    clean the headset
  6. Keep the headset dry

QCY HT01 Warranty Card

  • Warranty Period
  • 12 months after you purchase this item (or you may
  • inquire your local shopper for more details.

Free service
Supposing any defects caused by quality issues occur
within the warranty period, please take this warranty
card and purchase receipts to your distributor for free
xchange servicc
Model number:
Date of Purchasing
User’s name
User’s phone
User’s Address
Shop’s Name
ops Address
Comments
Free exchange service will not be accessed under
following circumstances

  1. Damages caused unauthorized disassembly
  2. Defects or physical damages caused by leaking or
    dropping off
  3. Damages by act of God. Supposing your item is within
    any damages or defects except the above circumstances
    please return to us or your distributor for free repairing

QCY HT01 FCC Statement

This equipment has been tested and found to comply with th
imits for a Class B digita device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection agains harmful intererence in a residentia insta lation
This equipment generates uses anc can radiate rad o frecuency
energy and, if not installed and used in accordance with the
stuctions, maycause harmful interference to racio communications.
However, there is no guarantee that intererence will not occur
in a particular installation. If this equioment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures
Reorient or relocate the rece ving antenna
-Increase the separation be. ween the equipment and receiver.
Connect the equip ment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or anexerenced racio/TVtechnician for help
This device comp ies with part 5 o the FCC Rules. Operation
is subject to the following two conditions
(1)I his device may not cause harmful interferer ce, and (2)
this device must accept any interference received, including
nterference that may cause undesired operation
Changes or modilications not expressly approved by the party
responsible for compliance could voic the user’s authority Lo
operate the equipment.
FCC ID: RDR-IN2020L
FCC ID: RDR-IN2020R

QCY HT01 Hazardous substances and their contents in the item
Hazardous substances
Name Hg Cd)PBB PBDE DIBP DEHP DBP BBP
Main body X00000000O
ipsoooo000ooO
o00OOOO
Chargingx0oooooooo
This form is made by SJ/T 11364 regulation
0: means that hazardous substance content in the
homogeneous materials of this part is within the
limits of(EU)2015/ 863 regulation
X: means that hazardous substance content in at least
one certain homogeneous material of this part is
beyond the limits of (EU) 2015/863 regulation , but
there is no mature alternative in the industry at present,
it still conforms to the EU ROHS Directive in the scope
Of exemption
Notes: Please arrange using time properly as your hearing
may be damaged by using the device for a long time
Manufacturer: Dongguan Hele Electronics Co, Ltd

Leave a Comment