QCY T12 Manual English QCY T12 Earbuds Manual Instructions QCY T12 Reset QCY T12 Pairing Touch Control Charging User Manual Guide Warranty

New Advanced QCY T12 Earbuds popular worldwide, more and more customer got their QCY T12 , as QCY T12 package come with user manual instruction, there are many customer connect QCY for the problems as QCY T12 Manual English, QCY T12 Earbuds Manual, QCY T12 Instructions, QCY T12 Reset, QCY T12 Pairing, QCY T12 user manual etc.

QCY made a decision to post QCY T12 Manual online, then our customer can checking anytime anywhere!

QCY T12 Ture Wireless Earphones User Manual
For better using experience, please scan to download QCY app before start

Touch panel / LED / Pogo pins Mic / TYPE-C port

QCY T12 Reset

How to Reset QCY T12

Factory Setting

  1. Delete connectivity record on cellphone , if any
  2. Push earbuds QCY T12 into case and keep touching both panels for 10s or until LEDs blink red and green 3 times to reset QCY T12 to factory. After that , earbuds will auto pair with each other upon picking them up.
  3. If all steps success, QCY T12 Reset complete!

Please refer the following methods to fix connectivity errors

QCY T12 Pairing

How to Pairing QCY T12

How to Connect First time connectivity

  1. Open the charging case and two QCY T12 earbuds will auto power-on, paired with each other and turn connectable
  2. On phone, open the Bluetooth function , search for QCY-T12 and
    click to connect both QCY T12 earbuds to cellphone
  3. If connecting success, QCY T12 Pairing complete!

Switch connected device

Turn off phone A’s Bluetooth faculty and earbuds will auto
disconnect and turn connectable

On phone B, search for QCY-T12 and touch to connect
Multi-point connection is not available and earbuds will
auto reconnect to phone upon powering up again

QCY T12 Mono mode

  1. Earbuds were paired before. Keep touching panel on either earbud for 2s to power on them. They will auto turn connectable in 5s(LED will blink blue
  2. On phone, search for QCY-T12 and touch to connect the
    earbud to phone

QCY T12 How to Wear

  1. Rotate earbud and pop it into your ear then shake head to stability
  2. Please adjust Mic towards your mouth to gain better calling experience
  3. Please wear earbuds properly, making sure they fit in firmly and sound holes are inside ear channels

QCY T12 Touch Controls

  • Power on:
    • Keep touching the panel for 1.5s when earbuds are not in the case
    • Open the lid when earbuds in case within power
  • Power off:
    • Push earbuds in case to power off them when earbuds are power-on and case is within power
    • Keep touching the panel for 5s when earbuds are power-on
  • Answer / end call : Double touch the panel to answer / end the call when incoming call / calling
  • Ignore call : Keep touching the panel for 1.5s when incoming call
  • Voice assistant: Triple touch left panel when connected
  • Music pause / resume playing : Double touch when playing
  • Skip track backward: Keep touching left panel to skip track backward when playing
  • Skip track forward: Keep touching right panel to skip track forward when playing
  • Gaming Mode: Triple touch right panel to turn on / off gaming mode when connected

QCY T12 Charging the Case

When the case get charged, LED on case will glow solid red and turn green once topping up. When earbuds get charged, LED on earbud will glow solid red and turn green for 1 minute once topping up

QCY T12 Charging the Earbuds

Push earbuds into the case and close the lid earbuds will auto turn off and to be charged

  1. Before using the headset, please read the manual carefully and keep it for future references
  2. The headset need to be fully charged prior to first-time use
  3. If the headset is left unused for over two weeks, please recharge it periodically
  4. Please use the chargers made by qualified manufacturer
  5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it

QCY T12 Warranty Card

Warranty Period – 12 months after you purchase this item (or you may
inquire your local shopper for more details
Free service
Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service

Model number
Date of Purchasing
User’s Name
User’s phon
User’s Address:
Shops Name
Shop’s Address
Free exchange service will not be accessed under
following circumstances

Damages caused unauthorized disassembly

Defects or physical damages caused by leaking or
dropping off

Damages by act of God. Supposing your item is within
any damages or defects except the above circumstances,
please return to us or your distributor for free repairing

QCY T12 Caveats

  1. Never disassemble or modify your headset for any reasons to avoid any damages and danger
  2. Do not store the headset in extreme temperatures (under 0 C or over45°C)
  3. Avoid using the indicator close to the eyes of children or animals
  4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock
  5. Do not use harsh chemicals or strong detergents to clean the headset
  6. Keep the headset dry

QCY T12 FCC Statement

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may causehamful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions
(1) This device may not cause harmful interference, and (2
this device must accept any interterence received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment

(left earphone: ) FCC ID: RDR-IN2026L
Made In China
(right earphone: FCC ID: RDR-IN2026R

QCY T12 Hazardous substances and their contents in the item
Hazardous substances