QCY T9 Manual English QCY T9 Earbuds Manual Instructions QCY T9 Reset Factory Setting QCY T9 Pairing Charging Case QCY T9 User Manual Guide Warranty

QCY T9 Manual English QCY T9 Earbuds Manual Instructions

QCY T9 User Manual Guide Warranty

QCY T9 Manual TWS Bluetooth Earbuds Instruction video

Overview
Choose Your eartips
Please try medium eartips first as they fit most people
LED / Pogo pins / MFB / USB charging port / Charging case

QCY T9 Reset

How to Reset QCY T9

Factory Setting

  1. On cellphone, delete the connectivity records of QCY-T9
  2. Power off earbuds first before reset QCY T9 Earbuds. Hold MFBs for 10s or until LEDs blink red and green 3 times to set earbuds to factory
  3. After factory setting, please refer to build connection with cellphone
  4. If all steps success, QCY T9 Reset complete!
  5. Please try the following steps if earbuds fail to connect

QCY T9 Pairing

How to Pairing QCY T9

First Time Pairing

  1. Pick up both earbuds, pop both earbuds into the case to activate them
  2. Pick up both earbuds again
  3. On cellphone, search for QCY-T9 and tap to connect
  4. If paired success, QCY T9 Pairing complete!
  5. Once paired earbuds will auto power on upon picking up from the case. If earbuds fail to auto power on, please charge them and try again

Switch Paired Device

Turn off phone a’s Bluetooth faculty and earbuds will auto
disconnect and enter into pairing mode

On phone B, search for QCY-T9 and tap to connect Multi-point connection is not available. Earbuds will auto reconnect to phone B phone powering up again

QCY T9 Mono mode

  1. Power off earbuds, keep touching either panel for 5s to enter pairing mode(LEd blinks red and green
  2. On cellphone, search for QCY-T9 and tap to connect
  3. Connected

QCY T9 Touch Control

  • Power on:
    • Hold MFB for 1s when power off
    • pick up earbuds from case when charging
  • Power off:
    • Hold MFB for 3s (two earbuds will power off together if they are not connected to device)
    • pull back into case
  • Factory setting: Hold MFB for 10s when power off
  • Answer / end call : Press MFB while incoming call / calling
  • Ignore call: Press MFB while incoming call
  • Voice assistant: Hold MFB for 1s while connected
  • Mute on / off: Double press MFB while calling
  • Music pause resume playing: Press MFB while Play
  • Skip track: Double press MFB on right / left earbuds to skip track forward / backward
  • Switch call to earbuds: Hold MFB for 1s while switch call to earbuds
  • Switch call to phone: Hold MFB for 1s while call handled by earbuds

QCY T9 How to Wear

  1. Rotate earbud and pop it into your ear then shake head to check wearing stability
  2. Please adjust mic towards your mouth to gain better calling experience

QCY T9 Three-way Calling Switch

Press MFB to answer incoming call. If another call is coming in sync, press MFB to put the first call on hold while activating the second call or hold MFB to ignore the second call. Double press MFB to switch between held call and active call

QCY T9 Charging Earbud

Push earbuds into case then close the lid and earbuds will auto be charged. LEDs will glow solid red when charging and turn green for 1 minute once topped up

QCY T9 Charging the Case

Please charge the case via USB cable
Battery level< 60%: LEd blinks red Battery level between 60% and 95% led blinks green Battery level>95%: LED blinks white
Top up: LED turns on solid white

QCY T9 Parameter

Bluetooth version: V5.0
Standby time: approx. 7ohr
Charging time: approx. 2hr Music time: approx 4.5hr
Operation range: 10m(with no obstacle
Talk time: approx 4hr
Battery type: li-ion
Battery capacity(earbud): 3. 7V 43mAl
Battery capacity(case): 3.7V 380mAh
Input parameter(case): 5V=400mA
Bluetooth profiles: HSP/HFP/A2DP/AVRCP

QCY T9 Tips

  1. Before using the headset, please read the manual carefully and keep it for future reference
  2. The headset need to be fully charged prior to first-time use
  3. If the headset is left unused for over two weeks, please recharge it periodically
  4. Please use the chargers made by qualified manufacturer
  5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it

QCY T9 Caveats

  1. Never disassemble or modify your headset for any reasons to avoid any damages and danger
  2. Do not store the headset in extreme temperatures(under 0° Cor over45°C animals the indicator close to the eyes of children or
  3. Avoid using the indicator close to the eyes of children or animals
  4. Do not use this headset during a thunderstorm to avoid regular function and increased risk of electric shock
  5. Do not use harsh chemicals or strong detergents to clean the headset
  6. Keep the headset dry

QCY T9 Warranty Card

  • Warranty Period
  • 12 months after you purchase this item ( or you may quire your local shopper for more details.
  • Free service
  • Supposing any defects caused by quality issues occur within the warranty period, please take this warranty card and purchase receipts to your distributor for free exchange service

Model Number:
Date of Purchasing
User’s name
User’s phone
User’s Address
Shop’s name
Shop’s address
Comments
Free exchange service will not be accessed under
following circumstances
Damages caused unauthorized disassembly

Defects or physical damages caused by leaking or
dropping off.

Damages by act of God. Supposing your item is within
any damages or defects except the above circumstances
please return to us or your distributor for free repairing

QCY T9 FCC Statement

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or an experienced radio/Tv technician for help
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions
(1)This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment
FCC ID: RDR-IN1950

QCY T9 Hazardous substances and their contents in the item

Leave a Reply

Your email address will not be published. Required fields are marked *